Solid Fold 2.0 UTV Edition - Premium Hard Folding Cover Stack, Store, Secure
Take your UTV to the next level with a Solid Fold 2.0. The UTV Edition offers the same premium features of the Solid Fold 2.0 and more! Optimize cargo capacity with maximum protection and versatility. The Solid Fold 2.0 meets all of your utility needs!
The Solid Fold 2.0 UTV Edition offers increased hauling capacity allowing you to stow cargo both above and below the cover. This hard folding cover offers unique bed access with the ability to operate in three different positions. The articulating front hinge allows for full bed access, offering you the ability to carry tall, oversized cargo. The exterior tie down cleats allow you to secure stacked cargo on top of the cover.
Protect your precious cargo from the elements by storing under the cover. Add an additional layer of security by choosing the optional locking mechanism.
Same tough OEM construction as our pickup truck version. The UTV Edition features EnduraShield panels feature an automotive grade polymer that resists denting, scratches, and UV induced fading better than aluminum or fiberglass panels. Extang’s professionally engineered aluminum frame and hinges are power coated to match your UTV bed caps for an integrated cohesive appearance and incredible protection from wear.
No drill installation with exclusive brackets to mount the cover. Incredibly easy to install and remove. For most applications, a complete installation can be accomplished in under 5 minutes.
EXTANG YOUR UTV
If you are looking for a secure, reliable way to protect your UTV bed, look no further than the Extang Solid Fold 2.0 UTV Edition!
The Extang Solid Fold 2.0 UTV carries a 90-day warranty against defective materials or workmanship on all tonneau rails, aluminum components, clamps, bows, hardware.
This warranty is against defective materials and workmanship. The warranty is void if the product has been damaged by accident, unreasonable use, neglect, improper service/installation/removal, modifications, normal wear and tear or other causes not arising out of defective materials or workmanship. Consequential and incidental damages are not covered under this warranty.
Warranty is void if defect in materials and workmanship is not reported in writing within 90 days purchase.
Warranty does not cover the cost of shipping, including the cost of returning the product for warranty service or inspection.
Warranty does not cover scratches and dents to bed cover. Nor is damage covered from weight exceeding the noted maximum, or if it is not evenly distributed.
Warranty will be void if shipping damage is not reported in writing within 3 business days of purchase.
THE FOLLOWING CONDITIONS WILL ALSO VOID THE WARRANTY:
DRIVING WITH PANELS OPEN OR IMPROPERLY SECURED – Prior to vehicle operation, clamps must be tightly secured so that clamp lip tightly grips the inner side of installation brackets.
OPEN POSITION: tonneau must be completely folded and secured with BOTH buckles and front panel must be secured with both buckles around the roll cage. Do not drive more than 10 mph with cover in the Two Panel Open position.
CLOSED POSITION: Tonneau must be completely flat and secured at all 4 clamps.
Top of tonneau MUST be free of foreign material including snow and ice before opening panels or severe damage may result.
Do NOT tow or trailer the UTV with tonneau cover installed on the UTV.
Load and weight limits: Max weight for the top of the cover is 250 lbs evenly distributed, do not put a large source of weight on the cover if not evenly distributed.
Only use rubber bungee or standard bungee cords for attachment to tie down cleats, DO NOT use ratchet straps for attachment to tie down cleats.
The warranty applies to the original consumer/purchaser. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective. Warranty coverage starts from the date of purchase.
PERFORMANCE: Provided all warranty conditions are met, Extang will either repair or replace (at Extang's option) the product or component. Extang may require the original item to be returned postage prepaid for final determination. Extang reserves the right to substitute and offer the respective warranty discount on an entire replacement system or provide other remedies than those listed in this warranty for discontinued products or other reasons. A return authorization number must be obtained from our customer service department prior to returning any product. Shipping charges will apply for any repair or replacement. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.
Please feel free to make use of the Extang Solid Fold 2.0 UTV Bed Cover installation instructions below to assist you with the installation of your Extang Solid Fold 2.0 UTV Bed Cover. You will find a printed installation instructions to help guide you through the simple process.
If you have further questions or need technical assistance with the install of any Extang Solid Fold 2.0 UTV Bed Cover, please call one of our knowledgeable installation experts at 800-877-2588 or send us a message and we will be happy to assist you.
The Extang Solid Fold 2.0 UTV Bed Cover application guide will assist you in identifying the Extang Solid Fold 2.0 UTV Bed Cover hard folding tonneau cover that is made for your pick-up truck. Please feel free to select the Extang Solid Fold 2.0 UTV Bed Cover application that is right for you by making use of the make, year, model and truck bed size of your truck.
If you have questions about which Extang Solid Fold 2.0 UTV Bed Cover truck bed cover is the best fit for your truck, please call us at or Contact us and we will be happy to assist you.
- How easy is it to take the cover off?
- What are the Solid Fold 2.0 panels made of?
- What is the warranty?
- How long does it take to install the Solid Fold 2.0 cover?
- How much weight can it hold?
- Can I tow or trailer the UTV with the Tonneau/Cover installed?
- Am I able to use ropes or ratchet straps for attachment to tie down cleats?
- Do I have to secure all four clamps when my Tonneau is closed?
- Can I drive my UTV full speed with one panel open?
- What is the full speed I can drive my UTV when both panels open?
- Am I able to open the panel without storing clamps in clamp housing?
How easy is it to take the cover off?
What are the Solid Fold 2.0 panels made of?
What is the warranty?
How long does it take to install the Solid Fold 2.0 cover?
How much weight can it hold?
Can I tow or trailer the UTV with the Tonneau/Cover installed?
Am I able to use ropes or ratchet straps for attachment to tie down cleats?
Do I have to secure all four clamps when my Tonneau is closed?
Can I drive my UTV full speed with one panel open?
What is the full speed I can drive my UTV when both panels open?
Am I able to open the panel without storing clamps in clamp housing?